High-resolution modeling and evaluation of ozone air quality of Osaka using MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality. This is especially true for highly urbanized region with complex terrain and land-use. This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka, Japan. The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region. High-resolution Grid Point Value-Mesoscale Model (GPV-MSM) data were used after suitable validation. The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone. Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains, with the maximum improvement in the mean absolute gross error about 3 ppbv. In addition, 1-km grid results fared better than other grids at most of the observation stations that showed noticeable di erences in gross error as well as correlation. These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region, such as the Osaka region, which has complex terrain and land-use.     

High-resolution modeling and evaluation of ozone air quality of Osaka using an MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality.This is especially true for highly urbanized region with complex terrain and land-use.This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka,Japan.The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region.High-resolution Grid Point Value-Mesoscale Model μgPV-MSM) data were used after suitable validation.The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone.Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains,with the maximum improvement in the mean absolute gross error about 3 ppbv.In addition,1-km grid results fared better than other grids at most of the observation stations that showed noticeable differences in gross error as well as correlation.These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region,such as the Osaka region,which has complex terrain and land-use.     

Sorption-Desorption of Atrazine and Diuron in Soils from Southern Brazil

The objective of this study was to investigate the behavior of sorption and desorption of the herbicides atrazine (6-chloro-N ²-ethyl-N ⁴-isopropyl-1,3,5-triazine-2,4-diamine) and diuron [3-(3,4-dichlorophenyl)-1,1-dimethyleurea] in soil samples from a typical lithosequence located in the municipality of Mamborê (PR), southern Brazil. Five concentrations of ¹⁴C-atrazine and ¹⁴C-diuron were used for both herbicides (0.48, 0.96, 1.92, 3.84, and 7.69 mg L^?1). Sorption of both herbicides correlated positively with the organic carbon and clay content of the soil samples. Sorption isotherms were well described by the Freundlich model. The slope values of the isotherm (N) ranged from 0.84 to 0.90 (atrazine) and from 0.75 to 0.79 (diuron) for the lithosequence samples. Sorption of diuron was high regardless of the soil texture or the concentration added. The desorption isotherms for atrazine and diuron showed good fit to the Freundlich equation (R ² ≥ 0,87). Atrazine slope values for the desorption isotherms were similar for the different concentrations and were much lower than those observed for the sorption isotherms. Significant hysteresis was observed in the herbicide desorption. When the two herbicides were compared, it was found that diuron (N = 0.06–0.22) presented more pronounced hysteresis than atrazine. The results showed that, quantitatively, a greater atrazine fraction applied to these soils remains available to be leached in the soil profile, as compared to diuron.     

Fate of Mutagenicity Produced During Anaerobic Biodegradation of the Herbicide Chlornitrofen (CNP)

The mutagenicity of chlornitrofen (CNP)-containing solutions has been reported to increase during anaerobic biodegradation. In the present study, the fate of this increased mutagenicity under subsequent aerobic and anaerobic incubation conditions was investigated using two Salmonella tester strains, YG1024 (a frameshift-detecting strain) and YG1029 (a base-pair-substitution-detecting strain). Mutagenicity for both YG1024 and YG1029 strains increased during nine-day anaerobic biodegradation. During subsequent anaerobic incubation, the increased mutagenicity decreased gradually for YG1029 but did not change significantly for YG1024. By contrast, the increased mutagenicity decreased rapidly after the conversion to aerobic incubation for both YG1024 and YG1029 strains. The rapid decrease in mutagenicity during aerobic incubation was due to decreases, not only in an identified mutagenic metabolite (CNP-amino) but also in unidentified mutagenic metabolites.     

Impact of solids on biphasic biodegradation of phenanthrene in the presence of hydroxypropyl- β -cyclodextrin (HPCD)

The consequence of polycyclic aromatic hydrocarbons (PAHs) in the environment is of great concern. The hydrophobic properties of PAHs significantly impact phase distribution causing limited bioavailability. Enhanced biodegradation has been extensively carried out by surfactants and the redeployment effect was recognized. However, the quantitative relationship concerning the impact of solids was rarely reported. A batch of biphasic tests were carried out by introducing Mycobacterium vanbaalenii PYR-1 and hydroxypropyl-β-cyclodextrin (HPCD) into a mixture of phenanthrene solution and various glass beads (GB37-63, GB105-125, and GB350-500). The comparative results demonstrated that HPCD had little effect on microbial growth and was not degradable by bacterium. A model was proposed to describe the biodegradation process. The regression results indicated that the partition coefficient k_d (1.234, 0.726 and 0.448 L·g⁻¹) and the degradation rate k (0 mmol·L⁻¹: 0.055, 0.094, and 0.112; 20 mmol·L⁻¹: 0.126, 0.141, and 0.156; 40 mmol·L⁻¹: 0.141, 0.156 and 0.184 d⁻¹) were positively and negatively correlated with the calculated total surface area (TSA) of solids, respectively. Degradation enhanced in the presence of HPCD, and the enhancing factor f was calculated (20 mmol·L⁻¹: 15.16, 40.01, and 145.5; 40 mmol·L⁻¹: 13.29, 37.97, and 138.4), indicating that the impact of solids was significant for the enhancement of biodegradation.     

Evaluation of an electrolysis apparatus for inactivating antineoplastics in clinical wastewater

We recently reported a system for inactivating antineoplastics in which sodium hypochlorite is supplied by the electrolysis of sodium chloride solution. In this study, we designed an electrolysis apparatus for inactivating the cytotoxicity of antineoplastics in clinical wastewater using the system. The apparatus consists of an electrolysis cell with platinum-iridium electrodes, a pool tank, a circulating system for wastewater, a safety system for explosive gas and overflow, and an exhaust duct. The free chlorine concentration increased linearly up to 6500 mg l(-1), and pH also increased to 9.0-10.0 within 2h, when 0.9% sodium chloride solution was electrolyzed. We examined its efficacy with model and clinical wastewaters. The reciprocal of dilution factor for disappearance of cytotoxicity using Molt-4 cells was compared before and after electrolysis. In the model wastewater, that was 9.10 x 10(4) before electrolysis, and 3.56 x 10(2) after 2h of electrolysis. In the clinical wastewater (n=26), that was 6.90 x 10(3)-1.02 x 10(6) before electrolysis, and 1.08 x 10(2)-1.45 x 10(4) after 2h of electrolysis. Poisonous and explosive gases released by the electrolysis were measured; however, they were found to be negligible in terms of safety. The environmental load was evaluated by carbon dioxide generation as an index and it was found that the carbon dioxide generated by the electrolysis method was 1/70 lower than that by the dilution method with tap water. Moreover, the cost of the electrolysis method was 1/170 lower than that of the dilution method. This method was found to be both effective and economically valuable.     

A research on dioxin generation from the industrial waste incineration

By using fluidized-bed furnace and rotary-kiln+stoker furnace and four different kinds of industrial wastes such as waste wood, coffee mill, waste oils and waste plastics, we have drawn the following conclusions:

(1) A relationship between H6CBz and DXN is acquired, which is DXN=0.34×H6CBz^1.1.

(2) The following means of emission reduction can be considered. (a) Reduction of DXN and Cl accumulation within the furnace, (b) control by the incinerated object, (c) control through the precursors of H6CBz, (d) improvement through operational control, (e) ammonia injection into the high-temperature zone of the furnace seems to be effective in reducing DXN and (f) DXN concentration is high with CO above 1800 ppm, though it decreases with CO below ≈10 ppm.     

Impacts of converting from leaded to unleaded gasoline on ambient lead concentrations in Jakarta metropolitan area

Total suspended particulate mater （TSP） concentrations were monitored for one year from July 2000 and for one year from April 2003 in Jakarta City. Thirteen elemental TSP components, aluminum （Al）, sodium （Na）, iron （Fe）, lead （Pb）, potassium （K）, zinc （Zn）, titanium （Ti）, manganese （Mn）, bromine （Br）, copper （Cu）, chromium （Cr）, nickel （Ni）, and vanadium （V） were analyzed by a sequential X-ray fluorescence spectrometer. Al, Na, Fe, K, and Pb were major components at most of the sampling locations in 2000. However, only Pb in 2003 dramatically decreased to one tenth. The phase-out of leaded gasoline began on July 1, 2001 in Jakarta City and lead content in gasoline decreased to one tenth, too. The decrease in Pb concentration was a result of the phase-out of leaded gasoline, as lead emissions mainly are exhaust gas from vehicles.     

Dietary patterns and blood levels of PCDDs, PCDFs, and dioxin-like PCBs in 1656 Japanese individuals

The association between dietary patterns and blood dioxin levels has not been fully investigated. The present study population consisted of 755 men and 901 women (aged 15-73 years) living in 90 different areas of 30 prefectures of Japan. Dietary habits were assessed by inquiring about the consumption frequency of 28 foods, food groups and beverages. In addition, the blood levels of 29 polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzo-furans (PCDFs), and dioxin-like polychlorinated biphenyl (DL-PCBs) congeners were determined by high-resolution gas chromatography/mass spectrometry. The median total toxicity equivalent (TEQ) in the blood, which was calculated on the basis of the toxicity equivalency factors of WHO (2005), was 16 pg TEQ g⁻¹ lipid. Principal component analysis identified five dietary patterns: Healthy diet (high intake of vegetables and fruits); Meat/High fat intake (high intake of meat, meat products, and eggs); Seafood and Alcohol (high intake of fish, shellfish, and alcoholic beverages); Miscellaneous; and Milk products and Alcohol intake (high intake of milk, Milk products, and alcoholic beverages). After adjusting for sex, age, body mass index, and smoking habits, the Seafood and Alcohol pattern scores were significantly related to higher blood levels of total TEQ and PCDDs/PCDFs/DL-PCBs, and the Milk products and Alcohol pattern scores were correlated with higher blood levels of DL-PCBs. More detailed analysis showed that the intake frequencies for alcoholic beverages and seafood were independently and positively associated with total TEQ and the TEQ of PCDFs and DL-PCBs. The association between alcoholic beverage intake and PCDDs was also significant. Analysis of dietary patterns may be useful for identifying the dietary characteristics of individuals with a high dioxin body burden.